세부사항 |
◈ Frequency range : 20Hz to 3.6/8/26.5/40GHz
◈ SSB phase noise : <-123dBc, 10KHz offset
◈ Resolution bandwidth :10Hz to 20MHz, 50MHz
◈ I/Q bandwidth : 120MHz
◈ Trace detector : peak, sample, RMS Average,Quasi peak
◈ Signal analysis formats : FSK, MSK ,PSK QAM ,GFSK ,8VSB etc.
◈ interface : IEEE488, RS232C,LAN,USB
◈ Universal Digital/Vector Signal Analysis
Supports all major mobile communication standard
Wideband signals demodulation capabilities
versatile resolution filters
full choice of detector
Application firmwave for various Mobile standards like:
Bluetooth,GSM/EDGE, CDMA2000 1xEV-DO, 1xEV-DV
WCDMA, HSDPA WLAN802.11a/b/g
◈ Option 사항 ◈
FS-K4 Phase Noise Measurement Software
FS-K5 GSM/EDGE Application Firmware
FS-K7 FM Measurement Demodulator
FS-K8 Application Firmware Bluetooth?? Transmitter Measurement
FS-K9 Power sensor measurements
FS-K30 Application firmware for noise figure and gain measurements
FS-K40 Application firmware for phase noise measurements
FSQ-K70 Firmware General Purpose Vector Signal Analyzer
FS-K72 WCDMA 3GPP Application Firmware BTS
FS-K73 WCDMA 3GPP Application Firmware UE
FS-K74 3GPP HSDPA Base Transceiver Station (BTS) Application Firmware
FS-K76 3GPP TD-SCDMA BTS Application Firmware
FS-K77 3GPP TD-SCDMA Mobile Station (MS) Application Firmware
FS-K82 cdma2000 / IS-95 (cdmaOne) BTS Test Application Firmware
FS-K83 cdma2000/1xEV-DV MS Application Firmware
FS-K84 1xEV-DO Base Station Test Application Firmware
FS-K85 1xEV-DO Mobile Station Test Application Firmware
FSQ-K90/K91 WLAN 802.11a/b/g/j Application Firmware
FSQ-K92 WiMAX 802.16-2004 OFDM Application Firmware
◈ Hardware options ◈
FSU-B4 Improved aging OCXO
FSU-B9 Tracking generator 9 kHz to 3.6 GHz
FSP-B10 External Generator Control
FSU-B12 Output Attenuator, 0 dB to 70 dB, for R&S FSU-B9
FSQ-B18 Removable Hard Disk
FSQ-B19 second Hard Disk for FSQ-B18
FSU-B21 LO/IF ports for external mixers
FSU-B25 Electronic Attenuator, 0 to 30 dB, preamp 20 dB
FSQ-B23 Preamplifier 3.6 to 26 GHz for FSQ26 (requires FSU-B25)
FSP-B28 Trigger port for R&S FSQ for indication of trigger conditions
FSQ-B71 baseband inputs DC to 36 MHz
FSQ-B72 I/Q Bandwidth Extension
◈ External harmonic mixers (for R&S FSQ26/FSQ40 with Option FSQ-B21) ◈
R&S FS-Z60 Harmonic Mixer 40 GHz to 60 GHz
R&S FS-Z75 Harmonic Mixer 50 GHz to 75 GHz
R&S FS-Z90 Harmonic Mixer 60 GHz to 90 GHz
R&S FS-Z110 Harmonic Mixer 90 GHz to 110 GHz
|
