Yokogawa / ScopeCorder / DL750P/F/J3/HK/M1/C8/C10/G3

Innovative Solutions for Long-Term Recording

GIGAZoom Function for Instantaneous Full-Length Display of 1 GW of Data

1 Giga memory for full-length display and instantaneous zooming (to user-specified length)

Amount of time data can be recorded with 1 GW memory.

DualCapture: A Powerful Tool for Durability Test Data Analysis

Simultaneous High-Speed and Low-Speed Recording Using DualCapture

During durability testing, it is necessary to monitor the long-term trends of your data as well as capture the high speed transients that might occur. This presents a challenge as trend data is usually recorded at a slower sampling speed that might miss the transient phenomena. To meet this challenge, the DL750 offers the DualCapture function.

DualCapture 

Using DualCapture, you can now record your trend data with a slow sampling speed and still be able to capture the transient phenomena with a faster sampling speed.
 

• Integration of a High-Speed sampler (Oscilloscope) and Low-Speed sampler (Recorder) in a Single Unit
  High-speed sampler: Trigger on abnormal high-speed phenomena
  Low-speed in a sampler: Roll recording (trend recording)

• Separate Memory Management for Each sampler
  Maximum memory for low-speed: 100 MW
  Maximum memory for high-speed: 10 kW * 100 screens


• High-Speed Sampling Triggered Only by Abnormal Events Occurring during Long-Term Observation (Low-Speed Sampling)
  Effective for separately capturing data at high speed

• Long Memory Equivalent to 1 Teraword (1012)
  To acquire many hours of data at the higher sampling rate (10 MS/s) would require Teraword of memory:
  (8 hr to 24 hr) × 60 min × 60 sec × 10 MS/s × 16 channels = 4.6 to 138 TW

The waveform shown above was captured at a sampling rate of 50 kS/s. The occurrence of noise can be confirmed in the graph, but the time resolution is too low to capture the waveform accurately.

With DualCapture, the user sets triggers for capturing sudden phenomena. Up to 100 phenomena can be collected in a memory length of 10 kW at a maximum sampling rate of 10 MS/s.

Modules

DL750 Module LineUp

• 701250 High-Speed 10 MS/s 12-Bit Isolation Module
  Broad bandwidth (3 MHz) and high accuracy (0.5%) inputs

• 701251 High-Speed 1 MS/s 16-Bit Isolation Module
  High resolution inputs combined with high-sensitivity (1 mV/div)

• 701255 High-Speed 10 MS/s 12-Bit Non-Isolation Module
  Non-isolated model with the same performance as the model 701250

• 701260 High-Voltage 100 kS/s 16-Bit Isolation Module (with RMS)
  850 V (DC+ACpeak) direct input, RMS mode support
  Accuracy of 0.25%

• 701261/701262 Universal Module (2CH)
  Multiple inputs of general-use voltage and temperature module, two isolated inputs (Voltage: 5mV/div-20V/div, 100kS/s, 16bit; Temperature: TC- K, E, J, T, L, U, N, R, S, B, W, Iron-Doped, Gold/Chromel, 500S/s), two types of modules: with or without AAF (Anti-Aliasing Filter)

• 701265 Temperature/High-Precision Voltage Module
  100 Hz frequency range, high-accuracy (0.08%) voltage measurements, and ultra high-sensitivity range value (100 µV/div)

• 701270 Strain Modules NDIS-type
  Wide ranges of bridge voltage (2 V, 5 V, & 10 V)
  Accuracy of 0.5%


• 701271 Strain Modules DSUB-type
  Wide ranges of bridge voltage (2 V, 5 V, & 10 V)
  Accuracy of 0.5%

• 701275 Acceleration/Voltage Module (2 CH)
  Inputs for both acceleration and voltage, built-in AAF (anti-aliasing filter), supports built-in amp type acceleration sensors (4 mA/22 V), isolated input.

• 701280 Frequency Module (2 CH)
  High speed (40 µs, 25 kHz) update rates, 0.01 Hz-200 kHz frequency range, 9 measurement modes, built-in real-time digital filters, deceleration/stop prediction, offset observation function, isolated input, multiple input types (direct input from electromagnetic pickups, 300 Vrms AC power supply input, contact input, chatter elimination function)

Firmware

Firmware Upgrade (Ver 3.01 or later)

More Advanced, More Convenient

• Numerical Monitor Function
  The waveform numeric level (instantaneous value) updates approximately every second even when starting, stopping, or performing long-term observation of a waveform. Useful for confirming the waveform input condition, or temperature/DC waveform levels. Confirm the levels of up to 16 channels simply by pressing the ESC key.
• Supports 100 kW-FFT
  Increased from 10 kW to 100 kW, 10 kW (8 ch), 100 kW/50 kW (2 ch)
• Improved Statistical Functions
  Supports history statistics. Increased number of cycle statistics items (from 24,000 to 48,000).
• Knocking Filter Function (DSP Channel Function)
  Offers dedicated menus for extracting the knocking portion of the waveform from the rest of the engine cylinder pressure waveform. HPF, BPF, and differential filters available. Includes functions for eliminating noise when the bulb opens/closes and for triggering on filtered waveforms. Max 6 channels and OR trigger are available.

 

 Firmware Download (product registration, ID and password for y-Link required)

---

Web Services

Turn Your DL750 into a Web Server

The DL750 can function as an independent Web server. Connect to your DL750 directly using Internet Explorer, and access a variety of services.

 

FTP

Easily copy and paste files to and from a PC from the internal flash memory drive and other internal storage media. You don't have to use a separate program to transfer the data.
 

Data Capture

Download screen images periodically or manually. Download waveform data, start or stop a measurement, or setup a split display by using this menu.

Measurement Trend

This function downloads values of waveform parameters periodically, activates MS Excel automatically, and graphs the calculated values on the PC. This enables you to check the parameter trends at a glance.

DC12 V Power Supply

* AC and DC power supplies can be used together to ensure a highly reliable power source. An external DC source such as a car battery is used for the DC power supply.

For AC and DC Input

Adding this option enables the DL750 to be run under DC power (10-18 V) as well as AC power (100-120 V/200-240 V). This allows the instrument to be used not only for in-vehicle measurements, but also in a wide range of other testing locations. The power source is switched automatically (when AC and DC are used simultaneously, AC is given priority).

Thin Profile
The DC Power Box is only 20 millimeters wide1, and weighs 800 grams.
The Power Box fits compactly on the rear panel.2

 

DC Power Box fits compactly on the rear panel (fits within the height of the feet of the DL1)	The DL can still be placed on its back with the option installed.

A Power Supply Backup System for Long Duration Observations

Simultaneous input of AC and DC power prevents loss of data when making observations over long periods of time (requires an external DC source such as a car battery). The DC input can be used as a backup power supply. If the AC power goes down, the DL instantly switches to DC input without interrupting the measurement.

Low Power Consumption

This option provides lower power consumption than when using an external DC/AC converter. This results in higher efficiency and significantly lower power consumption.

• Approximately 60 VA (typical value for 8 CH/10 MS/s)3
• Approximately 80 VA (typical value for 16 CH/10 MS/s)3

Low Emission Noise

Emission noise is greatly reduced compared with using an external DC/AC converter. High voltage switching noise is no longer a problem.

 

Two Cable and Connector Options 701970 DC Power Supply Cable (cigarette lighter plug type) 701971 DC Power Supply Cable (alligator clip type) B8023WZ DC Power Supply Connector (D-sub 3 pin/solder type)4

Low profile DC power supply connector (D-sub, 3 pin)

OPTION